Tools

6,150 found, showing page 22 of 154

26' X 1" TAPE MEASURE WITH BUI

26' X 1" TAPE MEASURE WITH BUI

XL GREY ADJ NECK HARNESS REFLTCV

XL GREY ADJ NECK HARNESS REFLTCV

23' HD DOG LEASH 100LB-RED RETRA

23' HD DOG LEASH 100LB-RED RETRA

23' HD DOG LEASH 100LB BLUE RETR

23' HD DOG LEASH 100LB BLUE RETR

16.5' HD DOG LEASH 66LB-RED RET

16.5' HD DOG LEASH 66LB-RED RET

16.5' HD DOG LEASH 66LB-BLU RET

16.5' HD DOG LEASH 66LB-BLU RET

10' HD DOG LEASH 33LB-RED RET

10' HD DOG LEASH 33LB-RED RET

10' HD DOG LEASH 33LB-BLU RET

10' HD DOG LEASH 33LB-BLU RET

15.75" CORKSCREW-CHROME

15.75" CORKSCREW-CHROME

5' HVY-DUTY DOG LEASG 110LB

5' HVY-DUTY DOG LEASH 110LB

CLAMP,PG ALUM 3-B 397-556.5

CLAMP,PG ALUM 3-B 397-556.5

HYDRO SWIM GOGGLE***************

HYDRO SWIM GOGGLE***************

SWIM TRAINER VEST**********

SWIM TRAINER VEST**********

CONNECTOR CU&CW4/0 750 MCM#KS39

CONNECTOR CU&CW4/0 750 MCM#KS39

2-B CONNECTOR 1STR-350 MCM#KS31

2-B CONNECTOR 1STR-350 MCM#KS31

1STR CONNECTOR 1STR-250 MCM#KS29

1STR CONNECTOR 1STR-250 MCM#KS29

2STR CONNECTOR 1/0STR KSA1/0

2STR CONNECTOR 1/0STR KSA1/0

CONNECTOR CU&CW 6STR-2STR #KS23

CONNECTOR CU&CW 6STR-2STR #KS23

CONNECTOR CU&CW 6STR 2SOL #KS22

CONNECTOR CU&CW 6STR 2SOL #KS22

CONNECTOR CU&CW 8STR 4SOL #KS20

CONNECTOR CU&CW 8STR 4SOL #KS20

*1/4-20 x 5/8"T U-BOLT, ROUND

*1/4-20 x 5/8"T U-BOLT, ROUND

#4 CONDUCTOR CPPR BRE SOLID HRD

#4 CONDUCTOR CPPR BRE SOLID HRD

#6 CONDUCTOR CPPR BRE SOLID HRD

#6 CONDUCTOR CPPR BRE SOLID HRD

#8 CONDUCTOR CPPR BRE SOLID HRD

#8 CONDUCTOR CPPR BRE SOLID HRD

AMMO CAN LOCKING KIT

AMMO CAN MAN LOCKING HARDWARE KIT The best and easiest way out there to make your ammo can lockable and safe! Plus, the watertight integrity of the can stays intact. This product can be installed in any standard sized 30 cal, 50 cal, or Fat 50 ammo can and the padlock stud will take up to a 1/4" lock shackle. The Locking Hardware Kit includes: 1/2" Solid Stainless Steel Stud Grade 8 Steel Nylon Lock-nut Steel and Zinc Plated Large Washer Steel and Zinc Plated Small Washer Neoprene Washer Detailed Instructions

UY CONNECTOR 20PC/PK

UY CONNECTOR 20PC/PK

3XL LED PAGE MANGIFIER

3XL LED PAGE MANGIFIER

WOOD BANDSAW BLADE 93.5" 8TPI

WOOD BANDSAW BLADE 93.5" 8TPI

CARBON BRUSH SET FOR CS10*******

CARBON BRUSH SET FOR CS10*******

ARMATURE REPLACEMENT PART

ARMATURE REPLACEMENT PART

115mm GRINDER WRENCH SPANNR

115mm GRINDER WRENCH SPANNR

2.25 HP VS Router Combo Kit

Bosch 12 Amp 2-1/4 Combination Horsepower Plunge and Fixed Base Variable Speed Router Kit 1617EVSPK with 1/4-Inch and 1/2-Inch Collets Variable speed dial, soft-start, maintains constant speed under load, quick clamp system on both bases, includes fixed base with system for adjusting bit height from above a router table, precision centering makes it easy to keep bit on intended cutline when using jigs, templates, dovetail fixtures and similar guidance devices, fixed base has threaded holes for mounting to router table positioned in Bosch 4-hole pattern and common 3-hole pattern, microfine, bit, depth adjustment system on both bases, wide base openings and 2" sub-base openings and provides better visibility, right or left.

2.25 HP VS Fixed-Base Router

2.25 HP VS Fixed-Base Router

ON-OFF SWITCH (11255VSR)

ON-OFF SWITCH (11255VSR)

CARBON BRUSH SET-4100XC*********

CARBON BRUSH SET-4100XC*********

4-1/2" SMALL ANGLE GRINDER

4-1/2" SMALL ANGLE GRINDER

USED 120MM AMMO CAN GRADE 1

Color: Olive Drab Green (Powder Coating Polish Paint). Our 120MM Military Surplus Ammo Cans feature a feature a rubber seal on the removable lid and carrying handles on either side. Product Dimensions: (Width) 6.75 inches x (Depth) 12.5 inches x (Height) 31.75 inches Ammunition Box Material: Carbon Steel SUS304, Aluminum 5052 Surface

1/2" HAMMER DRILL VSR

1/2" HAMMER DRILL VSR

BREAKER HAMMER-JACK 35LB.

The Bosch 11335K Jack Breaker Hammer delivers 22 Ft.-Lbs. of impact energy for the best material removal rate in class, impressive for a tool that weighs just 38 Lbs. Providing 1,300 BPM, this 15.0 Amp tool has all-metal housing, metal tube and case, and it can handle heavy-duty applications such as outdoor asphalt work or indoor foundation removal. It has a Vibration Control system, which includes a longer air cushion in the hammer mechanism and a shock-reducing top handle. This tool has a two-way tool retainer that accepts standard 1-1/8- In. hex, air tool steel with retaining collar or Bosch internal-locking combo steel. The breaker hammer with included carrying case with wheels is fully mobile, and it has Service Minderbrushes for preventative maintenance reminders.

13amp SDS-MAX DEMO HAMMER

The Bosch 11321EVS SDS-max® Demolition Hammer is a 13.0 Amp tool that gets the job done, delivering 6.1 Ft.-Lbs. of impact energy and a max of 2,900 BPM. Yet it weighs only 13.7 Lbs. for outstanding power-to-weight performance, and it has Vibration Control for all-day comfort. This hammer provides Constant Response circuitry for constant power under load, as well as smooth starts and overload protection. Vario-Lock positioning permits rotating and locking the chisel with precision, while the Auto-Max™ variable-speed dial permits the operator to match power to application – from 1,300 BPM to 2,900 BPM. The SDS-max® chuck system provides tool-free bit changes, while the Service Minderlight indicates that maintenance is needed. And the demo hammer has a 360° rotating auxiliary handle and a padded rear handle for extra operator comfort.

Recently Viewed Products